diff --git a/hot_fermentation.ino b/hot_fermentation.ino
index ea5ce1c..3893cbf 100644
--- a/hot_fermentation.ino
+++ b/hot_fermentation.ino
@@ -29,7 +29,7 @@ struct Profile {
 
 // Profiles definition
 Profile profiles[] = {
-  {"Test", {{49, 1}, {51, 1}, {55, 1}, {45, 1}}, 4},
+  {"Test", {{49, 1}, {51, 1}}, 2},
   {"Пшеница", {{47, 40}, {55, 40}, {65, 20}, {72, 20}, {85, 20}}, 5},
   {"Veggies Sous Vide", {{85, 120}}, 1},
   {"Фитаза/Протеаза", {{47, 120}, {53, 120}, {65, 150}, {72, 60}, {90, 105}, {50, 60}}, 6},
@@ -50,6 +50,8 @@ unsigned long totalStartTime;
 unsigned long ssrLastSwitchTime;
 unsigned long totalElapsedTime;
 unsigned long totalProcessTime;
+unsigned long finishTime = 0;
+bool isComplete = false;
 const int ssrSwitchInterval = 1000;  // SSR switching interval in milliseconds
 
 // Buffer for formatted time strings
@@ -95,32 +97,46 @@ void loop() {
   }
 
   // Check if the phase duration is complete
-  if ((unsigned long)((currentTime - phaseStartTime) / 1000) >= (unsigned long)activeProfile.phases[currentPhase].duration * 60) {
+  if (!isComplete && (unsigned long)((currentTime - phaseStartTime) / 1000) >= (unsigned long)activeProfile.phases[currentPhase].duration * 60) {
     currentPhase++;
     if (currentPhase >= activeProfile.numPhases) {
-      oled.clear();
-      oled.print("Complete");
+      isComplete = true;
+      finishTime = currentTime;
+      Setpoint = 45; // Set target temperature to 45°C
       digitalWrite(ssrPin, LOW); // Turn off the heater
-      return; // Stop further execution
+    } else {
+      phaseStartTime = currentTime; // Reset the start time for the new phase
+      Setpoint = activeProfile.phases[currentPhase].temperature;
     }
-    phaseStartTime = currentTime; // Reset the start time for the new phase
-    Setpoint = activeProfile.phases[currentPhase].temperature;
   }
 
-
   // Display all phases and highlight the current one
-  printPhases(currentPhase, currentTime - phaseStartTime);
+  printPhases(currentPhase, currentTime - phaseStartTime, currentTime);
 
   oled.update();
 
   delay(1000); // Update every second
 }
 
-void printPhases(int currentPhase, unsigned long phaseElapsedTime) {
+void printPhases(int currentPhase, unsigned long phaseElapsedTime, unsigned long currentTime) {
   oled.clear();
 
-  oled.setCursor(0, 0);
-  oled.print(activeProfile.name);
+  if (isComplete) {
+    // Show completion time and current temperature instead of the title
+    oled.setCursor(0, 0);
+    oled.invertText(true);
+    oled.print("Done! ");
+    formatTime((currentTime - finishTime) / 1000, timeBuffer); // Time since completion
+    oled.print(timeBuffer);
+    oled.print(" ");
+    oled.print((int)Input);
+    oled.print("c");
+    oled.invertText(false);
+  } else {
+    oled.setCursor(0, 0);
+    oled.print(activeProfile.name);
+  }
+
   // Display the totals and current state on the OLED
   oled.setCursor(18, 1);
   formatTime(totalElapsedTime, timeBuffer);
@@ -130,7 +146,7 @@ void printPhases(int currentPhase, unsigned long phaseElapsedTime) {
   oled.print(timeBuffer);
 
   for (int i = 0; i < activeProfile.numPhases; i++) {
-    if (i == currentPhase) {
+    if (i == currentPhase && !isComplete) {
       oled.invertText(true);  // Invert text for the current phase
 
       oled.setCursor(0, i + 2);  // Set cursor to the row corresponding to the phase