hot-fermentation/hot_fermentation.ino

#include <max6675.h>
#include <Wire.h>
#include <PID_v1.h>
#include <GyverOLED.h>  // Include the GyverOLED library

// MAX6675 configuration
int max_SO = 12;
int max_CS = 10;
int max_SCK = 13;
MAX6675 thermocouple(max_SCK, max_CS, max_SO);

// OLED configuration
GyverOLED<SSD1306_128x64, OLED_BUFFER> oled;

// SSR pin configuration
const int ssrPin = 7;

// Process phases (temperatures in Celsius and duration in minutes)

// const int temperatures[] = {49, 51, 55, 45};
// const int phaseDurations[] = {30, 30, 30, 30};  // Individual durations for each phase in minutes
// const int numPhases = 3;


// const int temperatures[] = {47, 55, 65, 72, 85, 0};
// const int phaseDurations[] = {20, 20, 20, 20, 20, 5};  // Individual durations for each phase in minutes
// const int numPhases = 5;

// const int temperatures[] = {85, 50};
// const int phaseDurations[] = {120, 120};  // Individual durations for each phase in minutes
// const int numPhases = 1;

const int temperatures[] = {47, 53, 65, 72, 90, 50};
const int phaseDurations[] = {120, 120, 150, 60, 105, 60};  // Individual durations for each phase in minutes
const int numPhases = 5;

// const int temperatures[] = {55, 65, 72, 80, 90, 10};
// const int phaseDurations[] = {60, 120, 120, 120, 30, 100};  // Individual durations for each phase in minutes
// const int numPhases = 5;


// PID Control variables
double Setpoint, Input, Output;
double Kp = 2, Ki = 0.5, Kd = 0.25;
PID myPID(&Input, &Output, &Setpoint, Kp, Ki, Kd, DIRECT);

// Timing variables
unsigned long phaseStartTime;
unsigned long totalStartTime;
unsigned long ssrLastSwitchTime;
const int ssrSwitchInterval = 1000;  // SSR switching interval in milliseconds

void setup() {
  pinMode(ssrPin, OUTPUT);
  Serial.begin(9600);
  oled.init();          // Initialize the OLED
  oled.clear();         // Clear the display
  oled.setScale(2);     // Set text scale to 2 for better visibility
  oled.print("Starting...");
  oled.update();
  delay(2000);
  oled.setScale(0);     // Set text scale to 2 for better visibility

  // Begin the first phase
  phaseStartTime = totalStartTime = millis();
  Setpoint = temperatures[0];
  myPID.SetMode(AUTOMATIC);
  myPID.SetOutputLimits(0, 1);  // SSR is either ON or OFF
  digitalWrite(ssrPin, HIGH); // Start with heater on
  ssrLastSwitchTime = millis();
}

void loop() {
  static int currentPhase = 0;
  Input = (int) thermocouple.readCelsius(); // Cast to integer for display and control
  unsigned long currentTime = millis();

  myPID.Compute();
  
  // Switch SSR based on PID output and interval control
  if (currentTime - ssrLastSwitchTime > ssrSwitchInterval) {
    digitalWrite(ssrPin, Output > 0.5 ? HIGH : LOW);
    ssrLastSwitchTime = currentTime;
  }

  // Display time calculations
  unsigned long totalElapsedTime = (currentTime - totalStartTime) / 1000; // Total elapsed time in seconds
  unsigned long totalProcessTime = 0;
  for (int i = 0; i < numPhases; i++) {
    totalProcessTime += phaseDurations[i] * 60;
  }

  // Check if the phase duration is complete
  if ((currentTime - phaseStartTime) / 1000 >= phaseDurations[currentPhase] * 60) {
    currentPhase++;
    if (currentPhase >= numPhases) {
      oled.clear();
      oled.print("Complete");
      digitalWrite(ssrPin, LOW); // Turn off the heater
      return; // Stop further execution
    }
    phaseStartTime = currentTime; // Reset the start time for the new phase
    Setpoint = temperatures[currentPhase];
  }

  // Display data on the OLED
  oled.clear();
  oled.setCursor(0, 0);
  oled.print(formatTime(totalElapsedTime));
  oled.print(" (");
  oled.print(formatTime(totalProcessTime));
  oled.print(")");

  oled.setCursor(0, 1);
  oled.print(currentPhase + 1);
  oled.print(". ");
  oled.print((int)Input);
  oled.print("C ");
  oled.print((int)Setpoint);
  oled.print("C ");
  oled.print(formatTime((phaseDurations[currentPhase] * 60) - ((currentTime - phaseStartTime) / 1000)));
  oled.update();

  delay(1000); // Update every second
}

String formatTime(long seconds) {
  long mins = seconds / 60;
  int secs = seconds % 60;
  return (mins < 10 ? "0" : "") + String(mins) + ":" + (secs < 10 ? "0" : "") + String(secs);
}